Why Is Your Dryer Not Getting Hot?

July 16, 2018 Published by Leave your thoughts

As a homeowner, you know the importance of regular maintenance and getting dryer repair in Addison, TX as soon as possible. Dryer issues should be addressed immediately—here are some reasons why your clothes dryer may not be getting hot:

  • Wrong voltage: If the machine is not hooked up to the proper voltage, it cannot function as it should. Luckily, there are ways to make sure enough power is getting to your dryer. Any of the following could explain why your dryer is lacking power. Start by checking that your dryer is plugged in. Then, check the circuit breaker box to ensure all the breaker switches are flipped to the correct positions. You also want to check that none of the fuses in the fuse panel have blown.
  • Heating element: A dryer that suddenly stops heating might have a defective heating element. Because heating elements cannot be repaired, you will have to replace it once it stops functioning properly. Before buying a replacement, have the heating element tested.
  • Dryer thermostats: Defective dryer thermostats are another reason why your clothes dryer is not getting hot. Take a look inside the dryer cabinet and test each of the dryer’s thermostats. Faulty thermostats need to be replaced.
  • Thermal fuse: Your dryer may not be heating properly due to a faulty thermal fuse. A blown thermal fuse is no longer usable and will need to be replaced. Open the dryer cabinet and test the thermal fuse.
  • Timer motor: Another possible reason your dryer is not producing heat is a defective timer motor. The timer motor should be tested to confirm whether this is the issue. If it’s not functioning, then the entire motor assembly (or just the motor) will need to be replaced.

Here are some useful troubleshooting steps you can take before calling for dryer repair in Addison, TX—you may be able to save yourself some time and money!

  • Make sure the dryer is not up against the wall. This can pinch off the airflow through the dryer vent’s air duct hose. Gas dryers require proper ventilation. Otherwise, the moisture will stick around.
  • Take a look at where the dryer air duct vents away from your house. Plants, a collection of lint, big debris or other objects could be blocking the vent. If you have a long dryer duct, lint may be stuck. The duct could benefit from a cleaning service.
  • For a gas dryer, turn off the gas, unplug it and disconnect the air duct at the back and clean out accumulated lint. You will need to relight the pilot light on some gas dryers.
  • Check for clogs inside the dryer by removing the lint filter and shining a flashlight inside. Use a vacuum to suck out any blockages.
  • Open up the dryer cabinet and check the condition of the heating element, thermostats and thermal fuse.

When in doubt, or if you are having a tough time troubleshooting and fixing a dryer problem yourself, hire a professional for washer and dryer repair in Addison, TX. Call Appliance Champion Dallas today to schedule a service appointment!

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *